Brand new printer, prints too lightly

[McNulty]

Just bought an HP 207dw laser printer.  Print is too light.  Same issue with multiple applications.

[zoey7886 · Accepted solution]

@McNulty, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Print Quality on HP LaserJet Pro 200 series! 

We're thrilled to have the opportunity to assist you and provide a solution.  

If your HP LaserJet Pro 200 printer is printing too lightly, here are some steps you can follow to improve print quality:

1. Check the Toner Cartridge

• Ensure the toner cartridge is correctly installed.
• The print cartridge may be nearing end of life. Consider replacing it with a new one.

2. Adjust Print Density:

• Sometimes the print density might be set too light. You can adjust it via the printer settings.
• Disable EconoMode if it is turned on.

3. Use HP Recommended Media:

• Ensure that the media (paper) meets HP's specifications. Media that is too moist or too rough can affect print quality.

4. Clean the Printer:

• The printer might need cleaning, especially the print cartridge area. Follow the instructions to clean the printer media path.

5. Verify Printer Settings:

• Ensure you have selected the correct media type in your printer driver settings.

Detailed Instructions:

Adjust Print Density and Disable EconoMode:

1. Open the printer properties via the Control Panel on your computer.
2. Navigate to the quality settings.
3. Adjust the print density as needed.
4. Disable EconoMode, if it is turned on.

Verify Media Specifications:

1. Use paper that is within HP's recommended specifications.
2. Avoid using paper that is too moist or rough. 

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,