cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Tractorboy1
New member
1 0 0 0
Message 1 of 3
94
Flag Post

Solved!

Cannot print code as no ink in cartridges

HP Recommended
Hp deskjet 2622
iOS

Need to order some

ink

want to subscribe to instant ink but need a code but as no ink cannot get code 

2 REPLIES 2
TEJ1602
HP Support Agent
HP Support Agent
17,856 17,833 1,446 1,415
Message 2 of 3
Flag Post
HP Recommended

@Tractorboy1, Welcome to HP Support Community!

 

If you have a Deskjet 3630, Deskjet 3700, or Deskjet 2600 printer, you can only produce the claim code by printing the page. If only one cartridge is empty, remove it and try to print the page with the remaining cartridge.

 

Once you have the ink in, follow the steps below-

 

Deskjet 2600 printers do not have an ePrint button. Find out if your printer is connected to a wireless network by pressing the Information button  to print a page titled “Printer Information Page". This page shows the status of the wireless network connection. Follow the instructions that correspond to your printer's network status:

  • The printer is already connected to a wireless network:

    1. Press the Information button  and the Cancel button  at the same time to print instructions.

    2. If the printed page does not contain an ePrint address and printer claim code, follow the instructions on the printed page to enable Web Services. After you enable Web Services, a page titled "Congratulations" prints with the ePrint address and printer claim code.

  • The printer is not connected to a wireless network:

    1. Press and hold the Wireless button  for 3 seconds to print the Wireless Quick Start Guide.

    2. Follow instructions in the guide to connect the printer to your wireless network.
    3. Press the Information button  and the Cancel button  at the same time to print instructions. If the printed page does not contain an ePrint address and printer claim code, follow the instructions on the printed page to enable Web Services. After you enable Web Services, a page titled "Congratulations" prints with the ePrint address and printer claim code.

If the "Congratulations" page has only an ePrint address (no printer claim code), the printer was previously claimed to another HP Smart account (formerly HP Connected). Print the printer information sheet by pressing the Information button , and locate the printer IP address on the printed page. Enter the printer IP address in a web browser and navigate to the "Web Services" section of the web page. Remove and then re-enable web services. A page titled “Congratulations” prints with your printer claim code.

 

Hope this helps! Keep me posted. 

 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

 

TEJ1602
I am an HP Employee

jules36
New member
1 1 0 0
Message 3 of 3
Flag Post
HP Recommended

The information was not very helpful. I had no ink to print a page so it was useless

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation