cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
WomanLondon
New member
1 0 0 0
Message 1 of 2
51
Flag Post

Ghost images at top left hand corners of prints - cartridge alignment and reset no help

HP Recommended
HP Envy 5010
Microsoft Windows 10 (64-bit)

Ink jet printer.  No error messages.  Have cleaned cartridges and tried different paper.  Advice appreciated!

1 REPLY 1
The_Fossette
HP Support Agent
HP Support Agent
29,155 29,140 1,941 2,569
Message 2 of 2
Flag Post
HP Recommended

@WomanLondon

 

I reviewed your post and I understand that you are getting ghost images.

 

Don’t worry, I assure you I will try my best to get this sorted.

 

Are you facing the same issue when you make a copy?

From which application/software you are printing?

 

Meanwhile, I recommend you follow the below steps and check if it helps.

 

  1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
  2. Remove USB cable, if present. 
  3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
  4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
  5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

 

If you continue facing the issue, then root uninstall the printer and then reinstall it and check whether the issue is resolved.

 

Here is who it is done.

 

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

14.) Download and install the printer software from the below link.

 

http://hp.care/2nikIQ9

 

Let me know how it goes and you have a great day!

 

P.S: Welcome to the HP Support Community 😊

 

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

 

Cheers!

Stay Home – Stay Safe

The_Fossette
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation