cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for INSTANT INK, HP+ PLANS: INK AND TONER
We would like to share some of the most frequently asked questions about Instant Ink. Check out this link: HP INSTANT INK, HP+ PLANS: INK AND TONER. .
Joseph_Bruce
Level 2
23 15 1 5
Message 1 of 2
103
Flag Post

HP Color LaserJet 9500mfp Prints Black Ok, Colors Light, and Almost no Cyan?

HP Recommended
HP Color LaserJet 9500mfp
Microsoft Windows 7 (64-bit)

9500 stripes.jpg9500 demo.jpg

 

Cyan cartridge is almost new at 93%

 

Cyan drum is lowest in machine at 50%

 

Yellow cartridge is low; but still putting out yellow

 

Don’t have a good idea of when it happened.  Not used for color very often and black is fine.  No errors reported.

 

 

Any ideas appreciated.

 

Thanks,

 

 

Joe

1 REPLY 1
Joseph_Bruce1
New member
1 1 0 0
Message 2 of 2
Flag Post
HP Recommended

Changed the very noisy fan (paper path or fuser?) and we’re back to blue.

 

Fan was still moving a lot of air; but maybe not enough.  Fan I replaced it with had a slightly higher amperage rating (+ 10%).  Much more quite.9500 demo w new fan.jpg

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation