cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
38
Flag Post

I have a HP Deskjet 5810 Printer While Printing It is Spilling Black ink inside and out the printer

HP Recommended
HP Deskjet 5810
Microsoft Windows 10 (64-bit)

I have a HP Deskjet 5810 Printer While Printing It is Spilling Black ink inside and outside of printer and over the printed paper rest area

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
23,930 23,821 1,318 1,403
Message 2 of 2
Flag Post
HP Recommended

@ATHARVA_21

 

Welcome to the HP support community.

 

 Check the ink delivery system

  1. Make sure the transportation ink valve is in the unlocked position.

       CAUTION: 

    Printing with a locked transportation ink valve can damage the printheads.

    Unlocking the transportation ink valve

  2. Make sure the printer is turned on.

  3. Inspect the position of the blue printhead latch.

    1. Open the exterior door.

    2. Open the printhead access door.

      Opening the printhead access door

    3. Wait until the carriage is idle and silent before you continue.

    4. Visually inspect the printhead latch position.

      • If the printhead latch is closed, continue to the next step.

      • If the printhead latch is open, skip to Replace the printheads.

         CAUTION: 

      Do not touch the blue printhead latch! Touching the latch might open the carriage and cause damage to the ink system.

       

      Don't touch the blue latch

  4. Reach inside the printer through the printhead access door, and then manually move the carriage to the right.

    Moving the carriage to the right

  5. Visually inspect the ink delivery tubes.

    • If the tubes are white or ink stained, the printer is not properly primed or out of ink, skip to Replace the printheads.

      Example of a printer not properly primed

      Example of a printer out of ink with ink stained tubes

    • If the tubes are completely filled with dark ink, the printer is properly primed and filled with ink, continue to the next step.

      Example of a printer properly primed with dark ink

Check for ink smears on the back of printouts

  1. Load paper into the input tray.

  2. Press and hold the Power button, press the Cancel button  three times, press the Start Copy Color button  eight times, and then release the Power button.

    The printer feeds one page slowly. The printer might make some noise for approximately one minute.

  3. Wait until the page ejects from the printer before you remove it.

  4. Examine the test page.

You can refer this HP support document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation