My mfp136w ahowing low tonner issue after refilling it

[LEGIT0008]

model is (MFP136W)

Showing very low tonner on its display but i already get that refilled 

[Nal_NR]

Hi @LEGIT0008,

Welcome to the HP Support Community

I understand you are facing a toner issue with your HP Laser MFP 136w Printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Are you using genuine HP ink cartridges?
• Was there any recent update on the printer prior to the issue?

While you respond to that, Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware.

If the issue persists, then please contact phone support.

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[LEGIT0008]

I have already updated my printer and still getting tha same issue 

[Nal_NR]

Hi @LEGIT0008,

We are sorry that the issue is not resolved when the above troubleshooting steps were performed.

This might require one on one interaction to fix the issue

I've sent you a private message with further instructions. In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!