My printer keeps saying that it can't print even though I replaced the ink and reseted it

[Kennice]

I have a hp Deskjet2855e All - in - One printer and I have done everything that I am suppose to I have restarted the printer, reinstalled the ink and it still says that it can't print. And there are also blinking lights on my printer and I have no idea what they mean

[Irfan_06]

Hi @Kennice,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with your Printer that has blinking lights.

A) Please follow the steps below to perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) Refer to the steps on this link to further troubleshoot.

D) If the issue still persists, refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support