Printer says i need new ink cartridges but the cartridges are 3/4 full

[32111]

Printer says I need new unused cartridges for set up but I'm already set up. Cartridges are 3/4 full and were replaced recently. Cartridges are very expensive.

[Riddle_Decipher]

@32111 Here's a few steps that should help resolve the issue:

Step 1: Verify the cartridge numbers

Make sure the cartridge numbers match your printer and where the country/region the printer was purchased.

Go to HP Store and verify the cartridge numbers for your printer model and country/region. Replace any incompatible cartridges.

Step 2: Reset the printer

Reset the printer to recover from printer failures.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD

(By the end of this article all the issues should be resolved)

P.S: Welcome to HP Community 😉

Let me know how that pans out,

If you feel I was helpful, simply click on Accept as Solution to help the community grow,

That said, I will have someone follow-up on this to ensure you've been helped,

Just in case you don't get back to us, 

have a good day, ahead.