Streaking images from printer

[LinR53]

When printing jpeg images the colors are printing in shades of blue and red versus solid colors. The Text is printing black with no issues. I have replaced every ink cartridge and cleaned the print head. The test sheet looks fine.

[Nal_NR]

Hi @LinR53,

Welcome to the HP Support Community. 

I'd be glad to help you! 

I understand that you are having issues with the print quality. 

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Clean the printhead

• The printhead could be clogged, and you might need to clean the printhead several times to restore print quality. Use an automated tool from the printer control panel to clean the printhead.
• CAUTION:
• Never turn off the printer without ink cartridges installed. To avoid issues that require cleaning the printhead or that can damage the ink system, always replace ink cartridges as soon as possible, and always turn off the printer using the Power button.
• On the printer control panel, open the Setup menu, and then touch Printer Maintenance or Tools.
• Touch Clean Printhead, and then touch Continue.
• After the cleaning completes, a Test Page prints.

• Examine the Test Page.
• If the print quality is unacceptable, touch Clean Again to continue the next level of cleaning. If necessary, repeat these steps for the third cleaning cycle.
• Note: If the printhead is badly clogged, it might require another cleaning cycle. If so, wait 30 minutes before you perform all three levels of cleaning again.
• If the print quality is acceptable, touch Done.

Click here for the remaining steps. 

Try updating the firmware. Click here

Hope this helps! Keep me posted for further assistance

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.