cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    Know the Benefits of your HP account

    Connect with HP support faster, manage all your devices in one place, view warranty information and more– Click Here

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Highlighted
New member
1 0 0 0
Message 1 of 2
45
Flag Post

The printhead appears to be missing not detected or incorrectly installed?

HP Recommended
Microsoft Windows 10 (32-bit)

HP Officejet Pro 8610, getting error message "The printhead appears to be missing not detectd or incorrectly installed?  Checked all cartridges all are full/new.  Wiped off the metal contact with soft cloth.   Still getting error message and will not print anything.   HELP please!

1 REPLY 1
Highlighted
HP Support Agent
HP Support Agent
5,714 5,685 339 379
Message 2 of 2
Flag Post
HP Recommended

Hi @LEM6,

 

I'd like to help!

 

Please try the below suggestions:-

 

Reset the product

  • With the printer turned on, disconnect the power cord from the rear of the printer.
  • Unplug the power cord from the wall outlet.
  • Wait at least 60 seconds.
  • Plug the power cord back into the wall outlet.
  • Reconnect the power cord to the printer.
  • Turn the printer on. HP recommends plugging the printer directly into a wall outlet

Update the printer firmware

Updating the printer firmware might resolve printhead problems. Go to Updating or Upgrading Printer Firmware for more information.

 

Check the carriage for a printhead latch

Look at the carriage to see if it has a latch. The carriage is the part inside the printer that holds the printhead and cartridges. If the carriage does not have a latch (fixed printhead), then the only option is to service the printer.

  1. Open the door to access the cartridges.
  2. Wait until the carriage stops moving before you continue.
  3. Look at the right side of the carriage to see if the carriage has a printhead latch (a handle that can be raised, which allows the printhead to be removed).

 

    • If your carriage has a printhead latch, continue to the next step.

    • If your carriage does not have a printhead latch (fixed printhead), skip to Service the printer. If the printhead is fixed, then there are no additional troubleshooting steps available.

Example of a carriage with a printhead latch

Example of a carriage without a printhead latch

Animations of carriage with a printhead latch

Carriage without a printhead latch

Reseat the printhead up to three times

You might need to reseat the printhead up to three times.

  1. With the printer turned on, unplug the power cord from the rear of the printer.

  2. Lift the carriage latch, slightly lift the printhead, lower the printhead back into the carriage, wiggle the printhead left and right, and then lower the carriage latch to lock the printhead into place.

    Animation showing how to reseat the printhead in the carriage

  3. Close the cartridge access door.

  4. Reconnect the power cord to the rear of the printer.

  5. Wait for the printer to start, and then look for the error.

    • If the error message persists, repeat the steps to reseat the printhead up to three times.

    • If the error no longer displays, you are done.

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation