cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
New member
1 0 0 0
Message 1 of 2
70
Flag Post

cartridge not intended for this printer is displayed. I bought exact replacement from HP.

HP Recommended
HP Office Jet Pro 8600
Microsoft Windows 10 (64-bit)

HP printer ink 950 xl replacement does not work in my Officejet Pro 8600. says not intended for this printer. It clearly is the proper cartridge. can anyone help me trouble shoot?

1 REPLY 1
HP Support Agent
HP Support Agent
9,088 9,062 612 681
Message 2 of 2
Flag Post
HP Recommended

 Hi @JP-23

 

I'd like to help!

 

Try the below suggestions-

 

Reset the product

  • With the printer turned on, disconnect the power cord from the rear of the printer.
  • Unplug the power cord from the wall outlet.
  • Wait at least 60 seconds.
  • Plug the power cord back into the wall outlet.
  • Reconnect the power cord to the printer.
  • Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Clean the electrical contacts

Remove the cartridge indicated by the error message, clean the electrical contacts, and then reinsert the cartridge in its color-coded slot.

  1. Turn the printer on.
  2. Open the door to access the cartridges.
  3. Wait until the carriage stops moving before you continue.
  4. Remove the cartridge indicated in the error message from its slot, holding it by its side.
       CAUTION: Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections.
  5. Remove any protective tape that still might be on the contacts.
       CAUTION: Do not touch or try to remove the copper electrical strip
  6. Lightly dampen a lint-free cloth with distilled water, and then clean only the copper-colored contacts on the cartridge.
  7. Lightly dampen a lint-free cloth with distilled water, and then clean the electrical contacts in the carriage, located inside the printer.
  8. Wait 10 minutes for the contacts to dry.
  9. Reinsert the cartridge.
    • Insert the black cartridge into the right slot.
    • Insert the tri-color cartridge into the left slot.
  10. Repeat these steps for the other cartridge, if necessary.
  11. Close the cartridge access door.
  12. If the error persists, repeat the previous steps to clean the cartridge and carriage contacts a second time.
  13. Check for the error message

If the issue persists, I'd suggest you Contact HP in your region regarding the service options for your printer

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping 

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation