new cartridge not printing

[jaker5]

I just inserted a new ink cartridge, but it's not printing.

[Nal_NR]

Hi @jaker5,

Welcome to the HP Support Community. 

I'd like to help!

I understand that you are getting a cartridge error, Let's try a few steps. 

Reset the printer

Reset the printer to recover from printer errors or failures.

If your printer has a rechargeable battery, remove it.

With the printer turned on, disconnect the power cord from the printer.

Unplug the power cord from the power source.

Wait 60 seconds.

Reconnect the power cord to a wall outlet and to the printer.

1. NOTE: 

HP recommends plugging the printer directly into a wall outlet.

Turn on the printer to complete the reset.

Clean the ink cartridge and printhead electrical contacts

Remove any debris or buildup from the contacts on the cartridges and in the carriage.

Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.

Remove the cartridge indicated in the error message from the carriage.

Wipe the copper-colored contact on the cartridge with a lint-free cloth.

Place the cartridge to the side with the contact facing upwards.

Wipe the contact inside the printhead with a lint-free cloth.

Reinsert the cartridge into its color-coded slot, and then press down on it until it snaps into place.

Repeat these steps for any other cartridges indicated in the error message.

Close the door or lid to the cartridge access area.

Update the printer firmware to install the latest updates

Here are the steps:- Click here

Refer to this HP document for further assistance:- Click here

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!