cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
New member
2 0 0 0
Message 1 of 2
40
Flag Post

photosmart 7520 waste ink pad and holder preventing carriage from returning to park position

HP Recommended
hp photosmart 7520
Microsoft Windows 10 (64-bit)

hp photosmart 7520. 

the ink waste pad and holder are raised preventing the carriage from returning to park area on right side.  can this be repaired ?

1 REPLY 1
HP Support Agent
HP Support Agent
24,421 24,307 1,347 1,432
Message 2 of 2
Flag Post
HP Recommended

@misty999

 

Welcome to the HP support community.

 

Check for obstructions in the carriage path

  1. With the printer on, disconnect the power cord from the rear of the printer.

  2. If your printer has a battery, remove the battery.

  3. Open the door to access the carriage inside of the printer.

    Examples of carriage access doors

    Opening an access door on top of the printerOpening an access door on the front of the printer

  4. Look in the carriage path for debris such as crumpled paper or dislodged labels, and then remove any that you find.

    Example of a printer with debris in the carriage path

    View inside a printer showing crumpled paper in the carriage path causing a carriage jam

  5. If the carriage on your printer has a latch, make sure it is closed.

       CAUTION: 

    Ink tank printers: If the latch is closed, do not press down on it.

     

    If the printhead latch is closed, do not press down on it

  6. Use your hand to move the carriage to each side, making sure it moves freely. If the carriage is stalled or docked to one side of the printer and you cannot move it, continue with these steps.

  7. Close the carriage access door.

  8. Reconnect the power cord to the rear of the printer, and then turn the printer on.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation