cancel
Showing results for 
Search instead for 
Did you mean: 
Onyedika_2
Level 1
4 2 1 0
Message 1 of 4
171
Flag Post

HP LaserJet M608 Error 13.B2.D2

HP Recommended
HP LaserJet Enterprise M608
Microsoft Windows 10 (64-bit)

Printing from Tray 1 is fine but Error 13.B2.D2 (Paper Jam in tray 2) happens repeatedly when printing from Tray 2

 

Actions already performed

*Remove tray 2 and any form of paper jam

*Firmware upgraded

*Components (tray and rollers) swapped from another working printer.

 

Issue still persists after all the actions performed.

 

Any help with resolution will be appreciated.

IMG_20210528_122340.jpg

IMG_20210528_122404.jpg

 

 

3 REPLIES 3
Repairatrooper
Level 13
Level 13
8,548 8,447 887 2,590
Message 2 of 4
Flag Post
HP Recommended

Replace the pickup and separation roller. Make sure the new Sep roller has a black shaft on the upper roller not a white shaft.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Onyedika_2
Author
Level 1
4 2 1 0
Message 3 of 4
Flag Post
HP Recommended

Hello,

 

Thank you for your response.

 

The pickup and separation rollers were replaced from another working printer but the issue persists.

The pickup and separation rollers were from the faulty printer were fixed in the working printer and the printer works fine.

 

Kindly share any other suggestions for resolution please.

 

NOTE:

Please provide some clarity on what you meant by Sep roller has a black shaft on the upper roller not a white shaft

Was this reply helpful? Yes No
Repairatrooper
Level 13
Level 13
8,548 8,447 887 2,590
Message 4 of 4
Flag Post
HP Recommended

Repairatrooper_0-1622506108876.png

Question: Is the error constant, that is, present from when you power on the machine or do you have to try to print to get the error to come up? Were there any paper jams just before this error started happening. Is there any paper jammed anywhere? Does the paper get grabbed at all? One way to check is to put a small dot of white liquid paper or a feltpen mark on the side of the roller and install to see if the roller is turning at all.

If you find the information provided useful or solves your problems, help other users find the solution easier by giving kudos and marking my post as an accepted solution.
I am a volunteer, offering my knowledge to support fellow users, I do not work for HP nor speak for HP.


Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation