Create an account on the HP Community to personalize your profile and ask a question
1 REPLY 1
09-16-2020 04:15 PM
@FL999 Paper feed issues might result from using ripped, dusty, curled, wrinkled, or bent paper. The quality of the paper can also make a difference. Use these guidelines to help avoid the issue.
Use only good quality paper that meets printer specifications.
Make sure paper is loaded in the input tray.
Adjust the paper guides in the input tray to fit snugly against all paper. Make sure the paper guides do not bend the paper in the input tray.
Store all paper in a dry, cool place. Paper feed issues occur more often in humid environments.
Make sure the paper in the input tray is not curled. Uncurl paper by bending it in the opposite direction of the curl.
Do not print on paper that is already printed. The dampness of the ink can cause the paper to stick together.
Do not load paper while the printer is printing.
Before you load paper in the input tray, make sure the paper is neatly stacked and in good condition, and the paper path and tray are free from obstructions.
Remove any paper from the input tray.
Remove any severely bent, wrinkled, or torn paper from the stack.
Check for obstructions inside the input tray area. Even small pieces of paper can cause paper feed issues.
With both hands, hold the stack of paper, and then tap the bottom edge of the stack on a flat surface so that the stack is even on all sides.
FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 5 ONWARD
(By the end of this article all the issues should be resolved)
P.S: Welcome to HP Community 😉
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the 'Thumbs Up' icon below, followed by clicking on the "Accept as solution" on this post,
Have a great day!
I am an HP Employee
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for? Ask the community