I cannot open my hp6960 to access ink cartridges or jammed paper, left side sticks and won't life

[dlgillis]

Is there a button or some sort of release to lift open HP6960 to access jammed paper and ink cartridges? Mine won't lift on left side

[Jay_G24]

Hi @dlgillis,

I'd like to help!

I understand you are unable to access the ink cartridges or jammed paper.

Try the below suggestions -

Check for obstructions in the carriage path

Remove any loose paper or obstructions that might be blocking the carriage path.

1. Turn off the printer, and then disconnect the power cord.

2. Open the cartridge access door to get to the carriage inside the printer.

   EXAMPLES OF A CARTRIDGE ACCESS DOOR

   

3. Look for and remove any obstructions in the carriage path, such as crumpled paper or dislodged labels.

   EXAMPLE OF A PRINTER WITH AN OBSTRUCTION IN THE CARRIAGE PATH

   

4. If the carriage has a latch, gently press it down to make sure it is locked into place.

   CAUTION: 

   Ink tank printers: If the carriage latch is secured, do not press down on it. Doing so might damage the printer.

   EXAMPLES OF THE CARRIAGE LATCH

   

5. If the carriage is not locked in place, move it to each side, removing any obstructions blocking its path.

   CAUTION: 

   Do not force the carriage to move if it is locked or stuck. This can damage the printer.

6. Close the printer door.

7. Reconnect the power cord, and then turn on the printer.

Reset the printer

Reset the printer to recover from printer errors or failures.

1. If your printer has a rechargeable battery, remove it.

2. With the printer turned on, disconnect the power cord from the printer.

3. Unplug the power cord from the power source.

4. Wait 60 seconds.

5. Reconnect the power cord to a wall outlet and to the printer.

   NOTE: 

   HP recommends plugging the printer directly into a wall outlet.

6. Turn on the printer to complete the reset.

You may also refer to-A 'Paper Jam' Error Displays

If the issue persists, I'd suggest you Contact HP in your region regarding the service options for your printer

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping