cancel
Showing results for 
Search instead for 
Did you mean: 
markcrobinson1
New member
1 0 0 0
Message 1 of 2
61
Flag Post

OJ Pro 8710 AWFUL with photo paper

HP Recommended
OfficeJet 8710
Microsoft Windows 10 (64-bit)

From the start, I had to remove all paper and put in one sheet of photo paper.  If there was more than one sheet - it would grab both. It's gotten worse. Glossy Paper always jams.

I've done all the roller cleaning, etc.

 

1 REPLY 1
ShlomiL
Level 17
Level 17
31,163 30,877 5,322 12,403
Message 2 of 2
Flag Post
HP Recommended

Hi,

Using a Photo Paper would require adjusting the printer settings and using a supported media.

 

First, what exact photo paper do you use?

 

The printer supports a Glossy Photo Paper of 220 - 280 gsm, make sure the Photo Paper is intended for Inkjet printers (some may be intended for Laser printers as example) using a thicker or thinner media may cause paper feed issues.

 

Also, when closing the paper tray, be sure to change the paper settings of the printer to Glossy Paper (either Photo or Other Paper can be tried, this may very for different paper brands.

 

Also make sure the correct paper settings are selected on your computer:

https://support.hp.com/vn-en/document/c03422222

 

If you experience further issues, please clarify what exact media you are using.

 

Shlomi

 



Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution 🙂
Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation