cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.Windows 11 Support Center.
  • post a message
User5247099
New member
2 1 0 0
Message 1 of 2
115
Flag Post

Officejet Pro 7740: Problem with printing on card stock

HP Recommended
HP OfficeJet Pro 7740 Wide Format All-in-One Printer
Microsoft Windows 10 (64-bit)

When trying to print on card stock (65 lb paper), the last corner on the right side of the sheet is being bent on a 45 degree angle creating a double crease at the corner.  The larger crease measures 3/4" the smaller crease measures approx. 1/4".  Has anyone experienced this and know how to remedy the problem?

1 REPLY 1
User5247099
Author
New member
2 1 0 0
Message 2 of 2
Flag Post
HP Recommended

I determined that the problem was not with the printer but the paper itself.  The corners of the first 20 sheets loaded into the printer were already damaged in the way that was described in the post.  I verified that it was not a printer feed problem by printing a couple of undamaged sheets without issues.

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation