cancel
Showing results for 
Search instead for 
Did you mean: 
oldmaven
Level 1
8 4 0 0
Message 1 of 1
67
Flag Post

Paper jam in manual-feed slot

HP Recommended
LaserJet 1320
Microsoft Windows 10 (64-bit)

A sheet is stuck in the manual-feed slot of my LJ 1320.  It is a sheet of Avery labels intended for an inkjet printer, so it's thicker than normal paper. I inadvertently ran it with the duplexer on; it appeared to print OK, then got sucked back into the printer for the nonexistent side 2. and stayed there.  I can see it through the manual feed slot, and that edge looks fine, but lifting the green levers in the toner compartment shows me that the other edge is skewed.about 30 degrees.

 

What's the best way to extract this?

Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation