Paper jam

[curtds]

Printer 8030 says there's a paper jam but there is no paper.  I checked everything.  Can I reset the printer?

[Nal_NR]

Hi @curtds,

Welcome to the HP Support Community. 

I'd like to help!

Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.

Remove paper from the input tray

Remove any loose or jammed paper that is accessible from the input tray area.

NOTE:

Do not use paper thicker than 105 g/m2 (28 lb bond) for plain paper or 200 g/m2 (110 lb index) for cards.

Remove all paper from the input tray.

Press and hold the two output tray buttons, and then remove the output tray.

Pull out the input tray.

Gently remove any jammed paper and bits of torn paper from the tray area. To avoid tearing any whole sheets of paper, pull the paper with both hands.

Make sure there are no foreign objects in the paper path, and then reload the input tray with new paper.

Insert the input tray back into the printer, and then reinstall the output tray.

Click here for the remaining steps. 

Update firmware 

Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!