Printer issue

[Shreesha_7]

Actually I used my printer almost 7 years ago now I got it and I was able to connect it with my system but the paper is not been able to print as it the rollers inside it are full of dust give me an idea

[A_Gayathri]

Hi @Shreesha_7,

Welcome to the HP Support Community

I understand you are facing a print quality issue with your HP Deskjet 1000 Printer - J110a  won’t print i Not to worry I will help you to get a resolution to resolve the issue.

To assist better:

• Are you using genuine HP ink cartridges?
• Does the copy print out the same way? 
• What's the application you are trying to print from? 
• Have you tried printing from a different application or device? 

While you respond to that, let's print a Print Quality Diagnostic page -Post the Print Quality Diagnostic page here so we can help you further.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove the USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till the warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating the printer firmware. 
• follow the troubleshooting steps Fixing Print Quality Problems for the HP Deskjet 1000

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[A_Gayathri]

@Shreesha_7, 

I hope this message finds you well. I wanted to follow up on the technical issue that we discussed earlier and confirm that it has been successfully resolved..

If you encounter any further issues or have any additional questions, please do not hesitate to reach out to us. We are here to assist you and provide any necessary support.

I will be archiving this case for now however, you can respond to the same thread to continue the conversation.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Take care and have a great day ahead!