Printer paper/Feed issues

[JackieDowdee61]

I have a message in HP Smart that the paper tray is empty or open.  There is paper in the tray, and no jams are present.  What is the best way to fix this?

[sandytechy20]

@JackieDowdee61

Welcome to the HP support community.

I understand that you are getting feeding issue, I am glad to assist you.

Clean the paper feed rollers

Follow these steps to clean the paper feed rollers.

1. Remove any paper in the printer before you clean the rollers.

2. Press the Power button to turn off the printer, if it is not off already.

3. Disconnect the power cord from the rear of the printer.

      WARNING: 

   You must disconnect the power cord before reaching inside the printer to avoid risk of injuries or electric shock.

4. Open the cartridge access door.

   Figure : Open the cartridge access door

   

5. Locate the paper path cover, grasp the handle, and then lift up to remove it.

   Figure : Remove the paper path cover

   

6. Lightly dampen a clean swab with the water, and then squeeze any excess liquid from the swab.

7. Press the swab against the rollers inside the printer, and then rotate the rollers upwards with your fingers. Apply a moderate amount of pressure to remove any dust or dirt buildup.

   Figure : Clean the rollers in the paper path access area

   

8. Replace the paper path cover, and then close the cartridge access door.

   Figure : Close the cartridge access door

   

9. Gently turn the printer onto its right side, and then pull open the input tray so that you can access its underside.

   Figure : Turn the printer onto its right side

   

10. Lightly dampen a clean swab with the water, and then squeeze any excess liquid from the swab.

11. Clean the rollers in the gap behind the input tray. Make sure that none of the rollers are not missing, that they turn easily, and that they are springy when you press them.

    Figure : Clean the rollers behind the input tray

    

12. Before you turn the printer over to its normal position, continue to the next step to clean the paper pick rollers.

Reset the printer

Follow these steps in the order presented to reset the printer.

1. With the printer turned on, disconnect the power cord from the printer.

2. Unplug the power cord from the power source.

3. Wait 60 seconds.

4. Reconnect the power cord to a wall outlet and to the printer.

Refer to this HP document for further assistance:- Click here

Keep me posted.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.