cancel
Showing results for 
Search instead for 
Did you mean: 
Shrigandha
New member
1 0 0 0
Message 1 of 4
157
Flag Post

Problem in Paper feed

HP Recommended
MFP1136
Microsoft Windows XP

Hi

When I insert a sheet the feed does not take the paper in and it gives E1 error. Please suggest the solution.

3 REPLIES 3
sandytechy20
HP Support Agent
HP Support Agent
26,695 26,568 1,462 1,532
Message 2 of 4
Flag Post
HP Recommended

@Shrigandha

 

Welcome to the HP support community.

 

Clean the paper pick rollers on a printer where the paper tray is located on the bottom.

  1. Turn off the printer.

  2. Wait until the printer is idle and silent, and then disconnect the power cord and any cables from the rear of the printer.

  3. Remove the paper stack from the input tray.

  4. Lift the printer and place it on its side or back.

  5. Pull out the paper tray, and then locate the gray paper pick rollers.

    Paper pick rollers underneath printer
  6. Lightly dampen a cotton swab with water, and then squeeze it to remove any excess water.

  7. Clean the rollers with the swab, rotating the rollers with your fingers to completely clean them.

  8. Allow the rollers to dry for two minutes.

  9. Set the printer upright.

  10. Reconnect the power cord, and then turn on the printer.

You can refer this HP document for more assistance:- Click here

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
IRMA3
New member
1 1 0 0
Message 3 of 4
Flag Post
HP Recommended

I'VE ALREADY CLEANED THE PICKUP ROLLERS AND IT'S STILL NOT PICKING UP

 

0 Kudos
sandytechy20
HP Support Agent
HP Support Agent
26,695 26,568 1,462 1,532
Message 4 of 4
Flag Post
HP Recommended

@IRMA3

 

This seems to be a hardware issue.

I request you to talk to HP support.

They might have multiple options to help you with this.

  1. Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true
  2. Select the country.
  3. Enter the serial of your device.
  4. Select the country from the drop-down.
  5. Click on "Show Options".
  6. Fill the web-form. A case number and phone number will now populate for you.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation