8710 all in one wont update print apps

[Riley811]

8710 all in one printer wont update print apps that we use to scan to email.

[Elohi_NR]

Hi @Riley811,

Welcome to the HP Support Community. 

I'd like to help!

Follow the steps below-

Reset the printer

Sometimes a paper jam error persists even though there is no jammed paper (false paper jam). Reset the printer, which might clear a false paper jam error, and then try to print again.

With the printer turned on, disconnect the power cord from the printer.

Unplug the power cord from the power source.

Wait 60 seconds.

Reconnect the power cord to a wall outlet and to the printer.

Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

If you still have issues, try these steps to re-enable the web services -

Step 1 Remove the Web Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, touch ( HP ePrint ), and then touch (Web Services Settings).

2. Touch Remove Web Services.

Reboot the devices.

Step 2 Enable the Web Services -

1. From the top of the screen, touch or swipe down the tab to open the Dashboard, and then touch ( Setup ).

2. Touch Web Services Setup.

3. Touch Accept to accept the Web Services terms of use and enable Web Services.

4. On the screen that appears, touch OK to allow the printer to automatically check for product updates.

5. If the Printer Update Options screen is displayed, select one of the options.

6. When the printer is connected to the server, the printer prints an information page. Follow the instructions on the information page to finish the setup.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

[Elohi_NR]

Hi @Riley811,

Hope I was able to fix the issue. If you need further assistance, feel free to reach out to us. 

Give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers and did reply to you!

[Elohi_NR]

Hi @Riley811,

As we did not hear from you, I'll be closing this case for now. If you need further assistance, feel free to reach out to us.