Change defailt gateway

[vbgosta]

Change default gateway cp1025nw

[Irfan_06]

Hi @vbgosta,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I see that you are facing an issue with changing default gateway on your printer.

To change the default gateway on an HP LaserJet Pro CP1025nw Color Printer, follow these steps:

Access the Printer’s Web Interface:

• Ensure your printer is connected to the network.
• Find the printer's IP address:
  • Print a configuration page from the printer's control panel by navigating to the printer’s menu. Usually, you can find this under "Reports" or "Print Configuration."
• Enter the IP address into a web browser on a computer that's connected to the same network.

Login to the Printer's Web Interface:

• You will be prompted to enter a username and password. The default username is typically "admin" and the password might be "admin" or left blank, unless you've changed it.

Navigate to Network Settings:

• Look for a section related to networking, such as "Network," "Network Configuration," or "TCP/IP."

Change the Default Gateway:

• Within the network settings, find the option for the default gateway.
• Enter the new default gateway IP address.

Save Settings:

• Apply or save the changes. The printer might need to restart for the changes to take effect.

Verify Connectivity:

• After the printer restarts, ensure it’s connected to the network and can communicate with other devices by printing a network configuration page or pinging the printer’s IP address from a computer.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support