Envy 6452e printer slow to print after send print job

[Rickser]

I send a print job to the printer and it may print it then or wait up to 15 minutes.

[Pallipurath]

Hi @Rickser,

Welcome to the HP Support Community.

Thank you for posting your query.

I understand that your HP Envy 6452e printer is experiencing delays of up to 15 minutes before printing, I would request you to please follow the steps:

Reset the printer

• Reset the printer to recover from printer errors or failures.
• If your printer has a rechargeable battery, remove it.
• Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer.
• Unplug the power cord from the power source.
• Wait 60 seconds.
• Connect the power cord directly to a wall outlet and to the printer.
• Turn on the printer to complete the reset.

Reduce print quality to improve print speed (Windows)

• Selecting certain paper types or printing in higher quality can slow print speeds. Print with plain paper in reduced quality for faster print speeds.
• Search Windows for printers, and then click Printers & Scanners in the list of results.
• Click your printer, and then click Manage > Printing preferences.
• Click the Paper or Paper/Quality tab, and then make sure Plain Paper is selected in the Type or Paper type field.
• Adjust the print quality.
• HP inkjet and LaserJet printers: In the Print Quality field, make sure Draft or Normal is selected.
• HP Laser printers: Click the Graphics tab, and then click Standard in the Quality field.
• Click OK or Apply to confirm the changes.

Refer the link for a detailed steps: https://support.hp.com/au-en/document/ish_2817150-2408088-16 

Hope this helps, Please revert if the issue persists.

Take care and have an amazing day!

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards

Pallipurath.