HP Color Laserjet Pro MFP M282

[RobVdW]

Where in the menu's on the touchscreen of the printer can I change setup date/time , country . I made a mistake in the initial setup and can't change it .

Thanks

[Andr-1611]

Hello @RobVdW,
Welcome to the HP Support Community!

Try this:

Setup menu
	HP Web Services
	Reports
	Self Diagnostics
	Fax Setup
	System Configuration
		Language
		Paper Setup
		Print Quality
		Power settings
		Consumption setting.
		Volume
		Time/Date

now you can change.

Hope this helps! Keep me posted.
Andreas

If my post resolved your problem please mark this post as an "Accepted Solution".
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks”.

[RobVdW]

Andreas ,

After Consumption Settings the menu of my printer gives  Management , Inactivity Timer and Lettertype Courier . No Volume , Time , Date or Country .

Best Regards ,

Rob

[Andr-1611]

Hi Rob,

under Setup Menu > Reports > you find here "Menu structure"?

[RobVdW]

Andreas ,

Yes , I did print it ( two pages ) , as well as the  menu help ( two pages ) , but no date , time or country . It looks as if you're only allowed to enter these parameters once , in the very first set-up . So I thought to go back to the Standardsettings and begin from scratch , but that didn't work either .

Best Regards ,

Rob

[Andr-1611]

What is not right

1. date / time ?
2. or country ?

Regards
Andreas

[RobVdW]

Andreas ,

Date and Time , I could not enter .

Country : I'm not sure what I entered when started the printer the first time , and as I told you I can not check it .

But maybe you shouldn't spent more time on these issues , as I can print and copy .

Regards ,

Rob

[Andr-1611]

Hi Rob,

read in the manual on page 85 and try

Printer control panel
To use the control panel to set the date, time, and header, complete the following steps.
1. From the control panel, open the Setup menu.
2. Select the Fax Setup menu.
3. Select the Basic Setup menu.
4. Select the Time/Date option.
5. Select 12-hour clock or 24-hour clock.
6. Use the keypad to enter the current time, and then select OK.
7. Select the date format.
8. Use the keypad to enter the current date, and then select OK.
9. Select the Fax Header menu.
10. Use the keypad to enter the fax number, and then select OK.
NOTE: The maximum number of characters for the fax number is 20.
11. Use the keypad to enter the company name or header, and then select OK.
NOTE: The maximum number of characters for the fax header is 25.
12. Continue to Step 4: Run a fax test on page 74.

Hope this helps! Keep me posted.
Andreas

If my post resolved your problem please mark this post as an "Accepted Solution".
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks”.

[RobVdW]

Andreas ,

I'm sorry but this model is without fax , so there is no fax setup menu .

Regards ,

Rob

[Andr-1611]

Please contact HP support team in your region for help.

Regards
Andreas