My prinhter is saying there is a Configaration issue 0x8004015

[Gillian68]

When I go to print the printer is coming up with an error message: Configaration issue 0x80040154....can someone help me what this means and maybe how to solve the issue

Thanks 

[The_Fossette]

@Gillian68,

Welcome to the HP Forums!

This is a wonderful place to converse with the community, get assistance and find tips.

I'll be glad to help you 🙂

In order that I may provide you with an accurate solution, I will need a few more details.

• When was the last time the printer was working fine?
• Have you performed any troubleshooting steps before posting?

While you respond to that, please follow the below steps and check if it helps.

1.With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

2.Remove USB cable, if present.

3.Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

4.Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.

5.Turn on the printer and wait till warm-up period finishes and the printer is idle.

Let me know how it goes. Awaiting your reply!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Good day! Take care 🙂

Cheers!