Re-setup hp Laser jet MFP M29

[IbaPrint]

I changed the wifi modem, now, J can’t set up the printer, the printer not recognize the new wifi 

[Kumar0307]

@IbaPrint, Welcome to the HP Support Community!

If your router supports WPS, use these steps to connect your printer to your wireless network with the WPS button on the router.

1. Turn on the printer.

2. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

3. On the back of the printer, press and hold the Wireless button  and Power button  at the same time for 3 seconds.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that time frame, attempt these steps again.

   Once the printer connects to the wireless network, the purple Wireless light on the control panel turns on solid.

For more info and other methods, refer to - Wireless Printer Setup or No Connection after Router or Wi-Fi Settings Change

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day!