cancel
Cranny2 Student
Student
1 0 0 0
Message 1 of 2
52
Flag Post
HP Recommended

Envy 4500 series. Will not print when on Window 10. Will print with Word. Wont print anything AOL

Envy 4500 series
Microsoft Windows 10 (32-bit)

When I try to print I get error message printed in red 0x8007007e.    Printer works fine with Words and testing but wont work on Windows 10 or AOL.  Have downloaded updated driver from HP but still no luck 

1 REPLY 1
HP Support Agent
HP Support Agent
9678 9671 467 478
Message 2 of 2
31
Flag Post
HP Recommended

Envy 4500 series. Will not print when on Window 10. Will print with Word. Wont print anything AOL

@Cranny2

Welcome to the HP Community

 

Use HP Print and Scan Doctor to check connectivity

 

Download a special version of HP Print and Scan Doctor specifically created to help with the printing issue.

  1. Download HP Print and Scan Doctor.

  2. Run HPPSdr.exe from the download location on your computer.

  3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

    • If your printer is not in the list, turn it off and on, and then click Retry.

    • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

  4. If a screen prompts you to turn on printer updates, click Yes.

  5. If a screen prompts you to make your printer the default printer, click Yes.

  6. Try to print.

I recommend you delete the driver at the root level and Install the drivers, follow the steps below:

 

Remove the USB if connected

 

1.) In Windows, search for and open Programs and features 

2.) Select your HP Printer 

3.) Select Uninstall 

4.) In Windows, search for and open Devices and printers 

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose `Delete' or `Remove Device' 

6.) Open up the run command with the "Windows key + R" key combo. 

7.) Type printui.exe /s and click Ok. (Note: there is a space in between "printui.exe" and "/s") 

8.) Click on the "Drivers" tab 

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers 

 

Then, Click on this link: https://support.hp.com/in-en/drivers/selfservice/swdetails/hp-envy-4500-e-all-in-one-printer-series/... to download and install the HP ENVY 4500 e-All-in-One Printer series Full Feature Software and Drivers.

 

Assign Manual IP to the printer:

 

1) Print a Network configuration page from the printer's control panel. 

2) Look for IP address from the Network configuration page. 

3) Open web browser - Chrome or IE or any other browser that you are using. 

4) Type the IP address mentioned on Network configuration page into the browser's address bar or URL bar and press enter button. 

5) Go to the Network tab. 

6) Click on Networking from the left pane. 

7) Then click on Network Address (IP). 

😎 Click on Manual IP Address and go to suggest a Manual IP. 

9) Scroll down the screen and select Manual DNS server. 

10) Enter the Primary and secondary DNS server from the Network Configuration page into the Manual Preferred DNS server field. 

11) Click on Apply. 

 

Refer to the video link for step by step instructions - https://www.youtube.com/watch?v=SCnYyq80V9g 

 

Note: The video is for win 8 but steps are similar for other operating systems as well. You need to enter the IP address in the browser's URL or the address bar to access the printer page.

 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation