Error state

[Jones314]

I can't print front my desktop computer. It always says it's in "error state". On the other hand I can print from my cell phone and everything is on the same Wi-Fi network

[The_Fossette]

@Jones314,

I reviewed your post and I understand that you are unable to print from your computer.

Don’t worry, I assure you I will try my best to get this sorted.

Follow the below steps and check whether the issue is resolved.

1. With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet. 
2. Remove USB cable, if present. 
3. Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge. 
4. Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer. 
5. Turn on the printer and wait till warm-up period finishes and the printer is idle.

If you continue facing the issue, then root uninstall the printer and then install the printer using the printer IP address.

Here is how it is done.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Restart the PC

Add the printer using IP address -

1. Select “Start” and type “printers” in the search box.

2. Choose “Printers & scanners“.

3. Select “Add a printer or scanner“.

4. Wait for the “The printer that I want isn’t listed” option to appear, then select it.

5. Select “Add a printer using a TCP/IP address or hostname” , then select “Next“.

6. Select “TCP/IP Device” in the “Device type” list.

7. Type the hostname or the IP address of the printer. Select “Next“. To find the IP address of the printer, touch the Wi-Fi icon on the printer's control panel. 

8. Windows should find the printer if the printer is on and configured correctly. You may have to specify more information. If prompted, Select the type of network adapter installed in the printer in the “Device Type” drop-down list. You can also click “Custom” to specify custom settings for the network printer. Select “Next“

Let me know how it goes and you have a great day!

P.S: Welcome to the HP Support Community 😊

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

Stay Home – Stay Safe