cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Sunyung
New member
1 0 0 0
Message 1 of 2
70
Flag Post
HP Recommended

HP Deskjet all in one white screen

HP Deskjet 8600

Does anyone know how to or if the white screen is fixable? I already did this:

 

Now, I would suggest performing a printer power drain followed by a full factory reset on the printer. Follow the steps below to do a printer power drain:

 

  • With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
  • Remove USB cable, if present.
  • Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
  • Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
  • Turn on the printer and wait till warm-up period finishes and the printer is idle.
1 REPLY 1
Level 11
2,618 2,614 293 372
Message 2 of 2
57
Flag Post
HP Recommended

HP Deskjet all in one white screen

Get yourself a replacement screen from eBay and replace it, it's 2-minute job.

 

https://www.youtube.com/watch?v=WYvy97PpkgI&t=4s 

 

View my profile on LinkedIn
Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation