cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New member
3 2 0 0
Message 1 of 6
174
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

envy 5030

Hi, I have a HP Envy 5030 and it has an error code '0X00829C98 HW WATCHDOG C' and everything is flashing. I am unable to press any of the buttons, have tried unplugging and managed to change the cartridges. But I am still unable to print or stop the flashing and error code?

Tags (1)
5 REPLIES 5
Highlighted
Level 15
Level 15
1,346 1,338 134 300
Message 2 of 6
171
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

@Smich1978 

Hello,

In some cases, remove the ink cartridges and reset the printer can solve the error.

  1. Turn on the printer.
  2. Before continuing, wait until the printer is idle and silent.
  3. Disconnect the USB cable from the back of the printer. If your printer has a network or wireless connection, leave it connected.
  4. Remove the ink cartridges of the printer.
  5. With the printer turned on, unplug the power cord from the back of the printer and from the wall outlet.
  6. Wait at least 60 seconds.
  7. Plug the power cord into the outlet.
    NOTE:  HP then recommends reconnecting the printer's power cord directly into a wall outlet.
  8. Reconnect the power cord to the back of the printer.
  9. Turn on the printer, if it does not automatically make it.
    It is possible that the printer goes through a warm-up cycle. It is also possible that the printer lights blink and the carriage moves.
  10. Wait until the preheat cycle and until the printer is idle and silent before continuing.
  11. Reinsert the ink cartridge, and then close the access door to the cartridges.
  12. Print a calibration page, if prompted.
  13. If you disconnected the USB cable, reconnect it to the back of the product.
  14. Try to print.

Don't hesitate to ask us if you need us.


Best regards,:Wink:




I'm not an HP employee. Did this message answer your question? Include it below as an Accepted Solution! Did you find this message useful?  Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

0 Kudos
Highlighted
New member
3 2 0 0
Message 3 of 6
142
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

Thank you for the assistance, unfortunately it has not worked and I still have the same error code and flashing etc. 

0 Kudos
Highlighted
Level 15
Level 15
1,346 1,338 134 300
Message 4 of 6
133
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

@Smich1978 

Thanks for your return,

If the issue persists, I have sent you a private message with the required information.

You should only edit the specified fields and not post them publicly in the community.

If after resetting the printer the issue persists, the best thing to do would be to check the warranty of your equipment.

In case of need, do not hesitate to solicit us.

Best regards, :Wink:




I'm not an HP employee. Did this message answer your question? Include it below as an Accepted Solution! Did you find this message useful?  Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

0 Kudos
Highlighted
New member
3 2 0 0
Message 5 of 6
93
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

Thanks again. Unfortunately still did not work. Out of warranty, probably cheaper to just buy a new one 😒😩

0 Kudos
Level 15
Level 15
1,346 1,338 134 300
Message 6 of 6
91
Flag Post
HP Recommended

HP Envy 5030 error code '0X00829C98 HW WATCHDOG C'

@Smich1978 

Hello and thanks for your return,


Unfortunately, this confirms that the problem is hardware at the printer level.

 

In case of need, do not hesitate to solicit us.

Best regards,🤗




I'm not an HP employee. Did this message answer your question? Include it below as an Accepted Solution! Did you find this message useful?  Click on the thumbs up set to give a Compliment! Follow us on Facebook Assistance customers HP.

0 Kudos
Be alert for scammers posting fake support phone numbers on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation