cancel
Showing results for 
Search instead for 
Did you mean: 
Kishunag
New member
1 0 0 0
Message 1 of 7
1,370
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

HP Officejet Pro 8710

its  say driver is unavaialble

6 REPLIES 6
Level 19
Level 19
79,889 79,784 9,885 21,343
Message 2 of 7
1,346
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable


@Kishunag wrote:

its  say driver is unavaialble


@Kishunag

 

Please select the right Operating System  on your computer to download Software and Drivers and install to your computer

 

       https://support.hp.com/au-en/drivers/selfservice/hp-officejet-pro-8710-all-in-one-printer-series/790...

 

Regards.

BH
***
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
rl08
New member
1 1 0 0
Message 3 of 7
379
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

This didn't work, and I tried  it multiple times.

Reply
0 Kudos
BrainHackerJay
New member
2 2 0 0
Message 4 of 7
266
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

I have uninstalled and re-installed the software/driver a few times. Even after the process says completed, my system says "Driver is Unavailable."

Reply
0 Kudos
HP Support Agent
HP Support Agent
17,944 17,853 1,023 1,130
Message 5 of 7
210
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

@BrainHackerJay

 

Welcome to HP support community.

 

Which operating system is installed on the computer to which this printer is connected?

Did you uninstall the printer driver from root level?

 

Meanwhile:

Follow the below steps to if you are using Windows 10:

Perform root level uninstallation to remove all the printer related software's.

  • In Windows, search for and open Programs and Features.
  • Select your HP printer.
  • Select Uninstall.
  • In Windows, search for and open Devices and Printers.
  • In the Devices and Printers window look for your HP Printer. If you see it listed, right-click on it and choose "Delete" or "Remove Device.”
  • Open up the run command with the "Windows Key + R" key combo.
  • Type printui.exe /s and click OK.
  • Click on Drivers tab.
  • Look for HP Printer driver. If you see it click on it and click Remove at the bottom.
  • Select OK.
  • Remove all instances of the same.
  • Select Apply and OK on the Print Server Properties windows.
  • Close Devices and Printers. 
  • Restart the PC again.

Download and install printer driver

Click here to download the driver.

 

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

 

Sandytechy20
I am an HP Employee

Reply
0 Kudos
BrainHackerJay
New member
2 2 0 0
Message 6 of 7
183
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

I followed the instructions step by step and the printer still showed "Offline". 

I then turned off security and firewall protection and repeated the complete process.

Result was still the same: The software installs but status remains "Offline".

Reply
0 Kudos
HP Support Agent
HP Support Agent
17,944 17,853 1,023 1,130
Message 7 of 7
165
Flag Post
HP Recommended

HP officejet Pro 8710 driver is unavailable

@BrainHackerJay

 

Use HP Print and Scan Doctor to check connectivity

Download HP Print and Scan Doctor.

  1. Run HPPSdr.exe from the download location on your computer.

  2. Once HP Print and Scan Doctor opens, click Start, and then select your printer.

    • If your printer in not in the list, turn it off and on, and then click Retry.

    • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.

  3. If a screen prompts you to turn on printer updates, click Yes.

  4. If a screen prompts you to make your printer the default printer, click Yes.

  5. Try to print.

Assign manual IP address and that should fix the issue.

1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the Dashboard, touch ( Setup ).

2. Touch Reports .

3. Select network configuration report.

 

Setting a Static IP Address

Once you know your printer’s IP address, entering it is pretty easy. Here’s what you do:

HP Printer Static IP Address

  1. Run your Web browser.
  2. In the Web browser’s address bar, type the IP address of your printer and press Enter. Assuming you entered the right address, the HP printer control panel should appear.
  3. Click the Networking tab.
  4. Under Connections, click Wireless.
  5. Under IP Address Configuration, click Manual IP.
  6. Enter the IP address, subnet mask, and default gateway in the appropriate boxes.
  7. Click Apply.

You can refer this HP document for more assistance:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation