Port Match error for HP 4650 (Windows 10 64 bit)

[markdpatton]

I am using the HP Print and Scan Doctor 5.0 utility to try to troubleshoot my printer installation.  I keep getting a message saying "Wrong printer port configured".  Anybody have any ideas how to fix this issue?

[greenturtle]

Hi,

Thanks for using the HP Forums.

Can you try using a TCP/IP port?

Create a TCP IP port

1. Print a Configuration Page to get the printer's IPv4 address (you can also tap on the wireless icon on the Front panel of your Printer to get the IP address)
2. On your PC, go to Control Panel, from Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
3. Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
4. Type in the proper IP address for the printer.

This video resource will show you how to do it:

Create & Use TCP IP port

Note that you can ALWAYS revert back to the original port that the HP software installed by selecting the HP port under the Ports tab (in Printer Properties)

Let us know if that works

[markdpatton]

Thanks for responding.  That didn't fix the issue.  I am still getting the same message through the Print and Scan Doctor.  Any other ideas?

[greenturtle]

Hi,

Please Uninstall and Reinstall the FULL feature software following these steps:

1. Uninstall the software in your computer
2. Download and save the FULL feature software (do not install it online)

The following resource will help you :

http://123.hp.com/us/en/

Key in your printer model, Operating System and download & install the FULL feature software.

3. Install the FULL feature “Saved” software

Once you have downloaded and installed the FULL feature software, you will be able to print and scan.

If you are not sure how to do this, the following resource will walk you through the steps:

How to Uninstall Download & Reinstall a Printer software

Hope that helps!