cancel
Showing results for 
Search instead for 
Did you mean: 
jkdogs Student
Student
1 0 0 0
Message 1 of 2
65
Flag Post
HP Recommended

Printer jam

HP Envy 7645

I had to remove a few parts to clear a paper jam, now even after a reset the printer (and copier and scanner) aren't working. I get a "rolling" noise that keeps repeating itself. Any suggestions before I go buy a new one?

 

Tags (1)
1 REPLY 1
HP Support Agent
HP Support Agent
11,334 11,139 546 574
Message 2 of 2
41
Flag Post
HP Recommended

Printer jam

@jkdogs

 

I suggest you do a Hard Reset on the printer

 

(1) Turn the printer on, if it is not already on.

(2) Wait until the printer is idle and silent before you continue.

(3) With the printer turned on, disconnect the power cord from the rear of the printer.

(4) Unplug the power cord from the wall outlet.

(5) Wait at least 60 seconds.

(6) Plug the power cord back into the wall outlet.

NOTE: HP recommends connecting the printer power cord directly to the wall outlet.

(7) Reconnect the power cord to the rear of the printer.

(8) Turn on the printer, if it does not automatically turn on.

 

The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.

Wait until the warm-up period finishes and your printer is idle and silent before you proceed.

 

Refer to this document: https://support.hp.com/in-en/product/hp-envy-7640-e-all-in-one-printer-series/6617267/model/6779508/... for Resolving Copy Problems

 

Keep me posted, how it goes!

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

 

Thank you for joining the HP Community.

Have a great day!

Cheers:)

Raj1788
I am an HP Employee 

Reply
0 Kudos
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation