hp psc 1350 all-in-one does not print (Error)

[Leon26]

My all in one printer does not print. Everytime I try to print a word document, the red ''check paper'' and ''check ink'' lights start to blink red, even though these are fine. Moreoveer a error message appears in  the task window of my printer. The printer then does not function anymore and the only way to clear the failed print assignments is to restart the printer. However, when i do so and try to print again, the same problem occurs.

Als het in het nederlands ook kan, graag. is makkelijker uitleggen. bedankt

[sandytechy20]

@Leon26

Welcome to the HP Forums. I would be happy to help you with your HP PSC 1350 Printer. I understand that check paper light is blinking and you have already done some preliminary troubleshooting.

Don't worry though as I have a few steps to determine the issue and find a solution as well.

Open the paper tray.

Match the paper to the paper settings.

Clear any jammed paper.

Clear the paper jam from the front of the All-in-One.

Make sure that the carriage can move freely.

Clean the paper feed rollers.

Perform a power reset.

1. Press the On/Resume button () to turn on the product.

2. With the product turned on, disconnect the power cord from the rear of the product.

3. Unplug the power cord from the wall outlet.

4. Wait at least 15 seconds.

5. Plug the power cord back into the wall outlet.

6. Reconnect the power cord to the rear of the product.

7. If the product does not turn on automatically, press the On/Resume button () to turn the product back on.

Click here and refer the document to perform the above steps.

Let me know how it goes.

Cheers.

[sandytechy20]

@Leon26

Welcome to the HP Forums. I would be happy to help you with your HP PSC 1350 Printer. I understand that check paper light is blinking and you have already done some preliminary troubleshooting.

Don't worry though as I have a few steps to determine the issue and find a solution as well.

Open the paper tray.

Match the paper to the paper settings.

Clear any jammed paper.

Clear the paper jam from the front of the All-in-One.

Make sure that the carriage can move freely.

Clean the paper feed rollers.

Perform a power reset.

1. Press the On/Resume button () to turn on the product.

2. With the product turned on, disconnect the power cord from the rear of the product.

3. Unplug the power cord from the wall outlet.

4. Wait at least 15 seconds.

5. Plug the power cord back into the wall outlet.

6. Reconnect the power cord to the rear of the product.

7. If the product does not turn on automatically, press the On/Resume button () to turn the product back on.

Click here and refer the document to perform the above steps.

Let me know how it goes.

Cheers.

[Mym1]

I’ve done everything but my printer still not work. Can I try something else to reset it ? 

thanks 

[kevin-t]

Hello,

Thank you for posting in this thread. Unfortunately based on when the last response was made, I have closed this thread to help keep comments current and up to date. We recommend starting a new thread for your issue by clicking here.
To be more helpful with your post, you can add key information if you desire: 
1. Product Name and Number (please do not post Serial Number)
• Example: HP Pavilion DV2-1209AX or HP Deskjet 3000 Printer CH393A
2. Operating System installed (if applicable)
• Example: Windows XP, Windows Vista 32-bit, Windows 7 64-bit
3. Error message (if any)
• Example: ""Low disk space"" error in Windows
4. Any changes made to your system before the issue occurred
• Examples: Upgrading your Operating System or installing a new software; or installing new hardware like a printer, modem, or router.
If you have any other questions about posting in the community, please feel free to send me a private message!

Thank you