cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
Dan5033
New member
1 0 0 0
Message 1 of 2
55
Flag Post

4156 printer wifi configuring time

HP Recommended
Desk jet 4100
Microsoft Windows 10 (64-bit)

Connect to Wi-Fi is taking over 45 minutes to connect. Advise if that is the norm.

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
25,741 25,621 1,414 1,485
Message 2 of 2
Flag Post
HP Recommended

@Dan5033

 

Welcome to the HP community.

 

Are you getting any error messages?

 

Meanwhile:-

Perform a power reset

  1. Turn on the printer, if it is not already on.
  2. Wait until the printer is idle and silent before you continue.
  3. With the printer turned on, disconnect the power cord from the rear of the printer.
  4. Wait at least 30 seconds.
  5. Plug back the power cable straight to a wall outlet and printer without any surge protector.
  6. Turn on the printer.

Update the printer firmware

Here are the steps:- Click here

 

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation