Error E9 on Envy 6022e

[Shelly1140]

Bend new, after set up E9 error. Have tried everything off the support pages. 
Any ideas? Thanks 

[Anand_Andy]

Hi @Shelly1140,

Welcome to the HP Support Community

I understand you are getting an error message E9 on your HP ENVY 6022e All-In-One Printer. Not to worry I will help you to get a resolution to resolve the issue.

An E9 error occurs when there is an error after a printer firmware update or a printer reset.

Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

If the issue persists, then please follow the steps mentioned in this video: How to Fix an “E9” Error Message on the HP ENVY 6000e and 6400e Printer Series

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!