Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
New member
5 1 0 0
Message 1 of 2
Flag Post

HP OfficeJet Pro 8600 Plus sleeps and won't wake. MacOS Big Sur

HP Recommended
HP OfficeJet Pro 8600 Plus

OK, running MacOS Big Sur (11.1)

HP OffieJet Pro 8600 Plus


Issue: Printer works fine, then goes to sleep overnight.  Next day, it won't print.  The "ON" button is dark.. when I push it, it turns green, then goes dark again.  All I can do is reset (unplug, plug in, etc.). That clears it.


I followed advice from a previous post:

Changed from IPv4 or IPv6 to only IPv4. and then set a manual IP address.  Did not fix the problem.

Tried downloading updated drivers (although the link provided on the response was invalid), but not sure if I got the right thing as the page did not have an exact printer match) This also did not solve the problem.


This started after Xfinity replaced our modem as our original one quit working. It is supposedly a newer modem, but I don't know what type or model it is.


This issue is extremely inconvenient since it precludes me from using airprint. I don't want to have to replace this printer since I recently spent $200+ on a new printer head.


Please help if you can. 

HP Support Agent
HP Support Agent
10,230 10,203 721 817
Message 2 of 2
Flag Post
HP Recommended

Hi @miamagoo,


I'd like to help!


Let's try the below steps to see if that helps -


1.) Remove All Barriers: Certain building materials can get in the way of weaker signals like Bluetooth. Metal, bulletproof glass, concrete, and plaster are particularly bad, and marble, plaster and brick aren’t great easy. So if you’re really struggling with interference, your first step should be to move your Bluetooth devices away from these materials. That means no brick walls between you and your devices, and definitely no metal desks!


2.) Change Router Channel: If you have an Apple router and you’re constantly getting interference with your WiFi, try rebooting it. Upon restart, the station will search for a new channel. Specifically, a different channel than the one your Bluetooth devices is using to communicate. If you don’t have an Apple router, you may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best.


3.) Move Closer to Your Router: If you often find that you’re getting interference when talking on a wireless headset while on a WiFi call (you’ll know because you’ll hear static), try moving closer to your router. This will give you a more robust WiFi connection, so the Bluetooth frequency can’t overpower it.


4.) Get Away From Microwaves and Fluorescent Lighting: Both emit frequencies of 2.4GHz, and moving away from them will distance you from the source.


I'd like to know the following to isolate the issue further-


1.) Are the printer and Mac connected to the same network?

2.) Is your router dual-band enabled i.e., both 2.4GHz and 5GHz? If yes, make sure the dual band has different SSIDs for 2.4G and 5G networks.

3.) What is the distance between the router and the printer?

4.) Is there an antivirus software installed on your Mac?

5.) Could you perform a ping test using the Mac Network Utility and let me know the results? Use the printer IP address to perform a ping test, the printer IP can be located by selecting the wireless icon on the printer display.


Perform a ping test to check the connectivity

1.        Obtain the IP address of the printer by clicking on the Wireless icon on the printer

2.        On the MAC Go to Spotlight > search for Network utility > select Ping tab > enter the IP address of the printer in the box

3.        Check the second box that says Send only > 10 pings

4.        Click on ping > Check the results at the end if any packets are lost

5.        Note: There should be 0% packet loss, share the results in your next post.


The wireless status menu on your Mac should also give us quite a lot of information that would help us identify the issue. You can press and hold option-click the WiFi icon and then use shift-command-5 to take the screenshot. Press the space bar when the icon turns into a camera. Share the ping test results and the screenshot with us.


Also, check with your Internet service provider if your router is able to forward 'Bonjour packets'.  Bonjour locates devices such as printers, other computers, and the services that those devices offer on a local network using multicast Domain Name System (mDNS) service records. The software comes built-in with Apple's macOS and iOS operating systems. 


Hope this helps! Keep me posted. 


And, Welcome to the HP Support Community. 


Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation