cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
Eize
New member
1 0 0 0
Message 1 of 2
133
Flag Post

HP Printer WIFI

HP Recommended
HP Laser 107w
Microsoft Windows 10 (64-bit)

I have bought new HP Laser 107w printer, and wanted to connect it to WIFI.

But its not working with WIFI reapeaters, when i turn it off my printer connecting to WIFI.

Does anyone know how t fix it?

1 REPLY 1
sandytechy20
HP Support Agent
HP Support Agent
28,006 27,850 1,520 1,613
Message 2 of 2
Flag Post
HP Recommended

@Eize

 

Welcome to the HP support community.

 

I understand that you are unable to connect the printer through WiFi repeaters, I am glad to assist you.

It is advised to connect the printer directly to a WiFi router instead of connecting to repeaters.

However, assign a manual IP address and check if that helps, follow the below steps to assign a manual IP address:-

Assign a manual IP address to manually connect the printer.

Find the printer IP address to assign it manually.

  1. You can print Network Configuration Report from the machine’s control panel that will show the current machine’s network settings. This will help you to set up a network. Press the (Resume/Cancel) button for about 10 seconds on the control panel. Using this Network Configuration Report, you can find your machine’s IP address.

  2. For example: • IP Address: 169.254.192.192

Setting a Static IP Address

Once you know your printer’s IP address from the page you printed, entering it is pretty easy. Here’s what you do:

HP Printer Static IP Address

  1. Run your Web browser.
  2. In the Web browser’s address bar, type the IP address of your printer and press Enter. Assuming you entered the right address, the HP printer control panel should appear.
  3. Click the Networking tab.
  4. Under Connections, click Wireless.
  5. Under IP Address Configuration, click Manual IP.
  6. Enter the IP address, subnet mask, and default gateway in the appropriate boxes.
  7. Click Apply.

Let me know how it goes.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

Sandytechy20
I am an HP Employee

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation