I can reconnect my printer after I change the modem on office jet pro-8610

[SacGil]

I just replaced the modem, and I can't connect my Pinter to the Wi fi

[Raj_05]

Hi @SacGil,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To reconnect your HP Officejet Pro 8610 printer to your new modem, you'll need to follow these steps.

Printer Preparation:

• Make sure your printer is turned on.
• Check that it has paper loaded in the tray and ink cartridges installed.

Access Printer Menu:

• On the printer's control panel, touch the Wireless icon or open the Network Setup or Wireless Settings menu.

Connect to Wi-Fi:

• Select your wireless network from the list of available networks.
• Enter the Wi-Fi password using the printer's keypad if prompted.

Complete Setup:

• Once connected, your printer should print a Wireless Test Report or show a confirmation on the control panel.
• If you encounter any errors during setup, such as incorrect password or network not found, double-check the Wi-Fi settings and try again.

Software Setup (Optional):

• If you're also reinstalling the printer software on your computer, download the latest drivers and software from the HP website.
• Follow the installation instructions to reconnect your printer to your computer over Wi-Fi.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4

HP Support