-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- Re: I forgot the admin password for my HP laserjet MFP M130f...
Create an account on the HP Community to personalize your profile and ask a question
11-10-2023 01:22 PM
Hi @SheDud,
Welcome to HP Support Community.
Thank you for posting your query, I will be glad to help you.
If you've forgotten the admin password for your HP LaserJet MFP M130fw printer, you can try the following steps to reset it.
-
Factory Reset:
- Turn off the printer.
- Press and hold the lower right-hand corner of the touchscreen while turning the printer on.
- Continue holding the corner until the "Permanent Storage Init" message appears.
- Release the corner and the printer will perform a factory reset.
-
Default Password:
- Try using the default administrator password. Sometimes, the default password is either "admin" or blank (no password). Refer to your printer's manual or documentation to find the default password.
-
Update Firmware:
- Check if there is a firmware update available for your printer. Sometimes, updating the firmware can resolve password-related issues.
Remember that performing a factory reset will erase all the settings on your printer, including network settings. Make sure you have a record of your printer's configuration and be prepared to reconfigure it after the reset.
I hope this helps.
Take care and have a good day.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Alden4
HP Support
11-11-2023 07:30 AM
The solution that you sent did not work:( Any other ideas...PLEASE and THANK YOU
Factory Reset: Turn off the printer. Press and hold the lower right-hand corner of the touchscreen while turning the printer on. Continue holding the corner until the "Permanent Storage Init" message appears. Release the corner and the printer will perform a factory reset. Default Password: Try using the default administrator password. Sometimes, the default password is either "admin" or blank (no password).
11-11-2023 09:11 AM
@SheDud,
Thank you for your response, I really appreciate your efforts. As the issue still persists, I am sorry to hear that This needs one-on-one interaction I'm sending out a private message to assist you with the next course of action.
Please check your private message icon on the upper right corner of your HP Community profile Next, to your profile Name, you should see a little blue envelope, please click on it or simply click on this link.
Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Gaya1239 – HP Support.