Impossible to configure my HP7740 on Windows 10

[robertv13]

The printer is attached to my netwoork (other devices use AirPrint successfully) BUT I can not configured my printer with Windows 10

[Dragon-Fur]

@robertv13 

"Impossible" and "Cannot" indicate you are having trouble but it does not help us understand the type of problem you are having.

For example...

• What are you doing?
• What is not working?
• Have you ever used this printer with your Windows 10 computer before this?
• If yes, has anything changed?  New network?
• How is the printer connected? Is the printer on the network? 

Wireless?

How to Troubleshoot a Wireless Printer Connection | HP Printers | HP

• Are you trying to install or configure the printer software?

Example - Printer Software

=================================================================================

Preparation - Printer Software

If you have not done so,

In addition to the HP Smart application,

Install the Full Feature Software / full driver printer software for the printer.

HP Smart and other print software / applications benefit from having the full driver installed.

Printer Software Check

Notes

If the full driver printer software is installed, you will see the printer listed in Control Panel > icon view > Programs and Features.

The installation of the printer software adds two shortcut icons to the Desktop.

The Printer Assistant is named for the printer and provides access to Print , Scan , and Tools

HP Scan is named for itself and provides a direct call to the HP Scan software.

Programs_and_Features_Printer_Desktop_Icons_4

Next...

Printer software not installed - OR - (still) installed but not working?

NOTE:  If the printer software shows installed but is not working as expected,

Uninstall the printer software from Control Panel > icon view > Programs and Features

Restart the computer and log in

What if?

If software will not uninstall, appears to be removed and is “still hanging around” after you uninstall / Restart...

Microsoft:  Fix problems that block programs from being installed or removed

OR

Revo Uninstaller (Free version)

then

Restart the computer and log in

Reminder:  If using USB, disconnect the USB printer cable between the printer and the computer before installing software.  (Re)Connect the USB cable when instructed to do so near the end of the installation procedure.

Install a fresh copy of the Full Feature Software / Full Driver printer software

Restart the computer and log in

Method - Use the Easy Start Wrapper to Install the Full Feature / Full Driver Software

For printers that support the option,

Use the Easy Start wrapper to install and configure the printer software.

• Home Page - HP Easy Start 
• Open Category Software and Drivers 
• Topic: Software-Utility 
• Download-and-Save  the current version of the Easy Start wrapper to install your print software 
• If using USB:  Disconnect the USB cable between the printer and computer before installing the software.

• Right-Click on the downloaded package and "Run as Administrator" to start the installation

• When asked, Select to install the “Full Driver” / “Full Feature Software”
• If using USB:  Connect the cable when instructed to do so (near the end of the installation process).
• After the software is installed, Restart the computer and log in.

Notes >> Easy Start... The Journey

1. Full Administrator Rights are required to complete the HP Software installation.
2. About 2/3 of the way through the setup, you will be given the opportunity to select the software - select the "Full Driver" set (as opposed to the basic driver or other application).
3. You can skip / ignore suggestion(s) that you add the HP Account – you’ll need the account at some point, for now, you can skip this suggestion (as many times as it insists it’s a good idea) during the full driver software installation.
4. If you see it, you can skip / ignore suggestion(s) regarding Instant Ink subscription.  Instant Ink subscription is NOT mandatory.
5. Full driver includes print and scan functions supported by your printer and provides the printer features on which other applications / software might depend.

=================================================================================

HP Smart for Windows

HP Smart is an application available in the Microsoft Store

Learn how to use HP Smart on your Windows 10 computer.

Open the Software and Drivers Support Website for your printer > Check the Box Get the App

OR Open and Read >>> HP Printers - Using the HP Smart App (Windows 10)

NOTES: 

• Disconnect from Virtual Private Network (VPN) connection before downloading.
• Turn on Wi-Fi on your computer or mobile device and connect to your network. If the computer is connected to the network with an Ethernet cable, temporarily disconnect the cable and use the Wi-Fi connection during the setup.

• HP Smart requires that you sign into the application using your HP Account credentials.

• HP Smart benefits (likes) having the Full Feature Software / full driver printer software installed.  For example, full driver provides access to Shortcuts and Printing Preferences.

• Document includes the HP Smart application download links for Windows and Mobile devices, plus an FAQ section to assist with questions / issues.
  •  FAQ examples: 
    • What are the requirements to use the HP Smart app?
    • Which printers are compatible with the HP Smart app?
    • Why do I need to sign in or create an account to use the HP Smart app features?
    • Which languages does the HP Smart app support?
  • Older versions of the HP Smart app no longer support the required login feature.
  • Update the application to the latest version to access / use HP Smart

Example - HP Smart - Windows - Main Menu

HP_Smart_W10_Main_Menu_3

=================================================================================

References / Resources

Adobe Reader DC – Install Whether You Use It or Not

If you have not done so,

Reinstall / Update your PDF Reader (Adobe Reader DC /Optional  Foxit Reader)

HINT:  Watch out for and UNCHECK unwanted extra software

NOTE:  Adobe Reader DC software can be installed even if you do not normally open / view / print PDF files directly from the Adobe Reader DC software.

================================================================================

HP Printer Home Page - References and Resources – Learn about your Printer  - Solve Problems

 “Things that are your printer”

NOTE:  Content depends on device type and Operating System

Categories:  Alerts, Access to the Print and Scan Doctor (Windows), Warranty Check, HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, Manuals > User Guides, Product Information (Specifications), more

When the website support page opens, Select (as available) a Category > Topic > Subtopic

HP OfficeJet Pro 7740 Wide Format All-in-One Printer series 

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not an HP business group.

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question / Concern Answered, Click "Accept as Solution"

[robertv13]

Thank you for your reply. I have tried everything in your post, but it is still impossible to print from my Windows PC.

I have tried :

- HP Print & Scan dr

- HP SMart

- HP Easy Start 123

These programs can see/identify the printer, BUT CAN NOT GO ANY FURTHER to make it available in the Printers list.

The only concern I had (trying to do what you said to do) was to DISABLE my Bitdefender Endpoint Security tools, which show as 'unknown' if Network menu (firewall) in HPPSDR

I just want to say again, that all other devices connected to the WiFi network are able to print without any problem (iPhone, iPad, MacBook)

Regards,  

[Dragon-Fur]

@robertv13 

You are welcome.

Understood.

Add these to your checkpoints...

Sometimes just restarting Everything, including the router, works.

Not always, of course - but perhaps worth trying...

======================================================================

If you want to run the Doctor, use this version:

http://ftp.hp.com/pub/printers/hppsdr/patches/HPPSdr.exe

NOTES – The “Offline” doctor

As a result of repairing issues,

Offline / Color check / Duplex check version of the Doctor may replace the printer or add a “(Copy 1)” version of the driver in Devices and Printers.

If there are two printers in Devices and Printers,

If one of them does not work,

Try sending your job to the “Copy 1” named printer.

If you want / need to rename the “Copy 1” printer:

Open Control Panel > icon view > Devices and Printers

Right-Click on the printer name > Printer Properties > Tab General >

In the top box, Edit the name of the printer (For example, remove the part that says “Copy 1”)

Click Apply / OK to save change

NOTE:  The name change may take a bit of time (a few minutes), else Restart the computer and log in.

==============================================================================

What else?

The printer is perhaps tangled and might benefit from a Restart / Firmware update

HP Printers - Printer Turns Off Unexpectedly or Repeatedly

Step 2: Restart the printer

Step 3: Update the Firmware

OR

The issue is buried deep within the Windows environment somewhere.

It is rare that the issue cannot be kicked free.

It happens (have to reload Windows) - the fix is almost always "something else".

OR

More places to check...

Switch ON Network Discovery and (Printing) Printer File Sharing

How to Verify / Switch on / off Network discovery and File and Printer sharing

Control Panel > icon view > Network and Sharing Center

Change  advanced sharing settings >

Beneath Private (current profile) >

Network Discovery

Select (Switch ON   (Off = UNCheck) Turn on network discovery

Check / Switch ON  (Off = UNCheck) Turn on automatic setup of network connected devices

File and printer sharing

Select / Switch ON  (Off = UNCheck) Turn on file and printer sharing

HomeGroup Connections

Select / De-Select Allow windows to manage homegroup connections (recommended)

Save Changes

=====================================================================

Use this method when there are problems reinstalling the software.

Start - “All the bits”

Windows Updates

Before you install / reinstall printer software, do check and run Windows Updates. 

Settings > Update and Security > Windows Updates

If you install any Windows Updates: After the update is installed, Restart the computer and log in.

NOTE:  If an update is already pending, install that update > Restart the computer and log in

Printer Software – Blocked in Security Software

Check your Security Software to make sure the printer software is not being blocked.  Most Security software will allow you to make an exception for applications / software you want to use on your computer.

If you make changes to the security software setup, Restart your computer and log in.

Uninstall Existing Printer Software (Full Feature Software)

Control Panel > icon view > Programs and Features >

Find / Select > Uninstall the printer software

Restart the computer and log in

If software will not uninstall, appears to be removed and is “still hanging around” after you uninstall / Restart...

Microsoft:  Fix problems that block programs from being installed or removed

OR

Revo Uninstaller (Free version)

then

Restart the computer and log in

Check and Remove Section

Reminder: After all checks > Restart the computer and log in

Check / Remove - Printer Drivers – Lurking in Devices and Printers

Control Panel > icon view > Devices and Printers

Left-Click on any unwanted Printer found in the Printers list

(Top Ribbon) Click Print Server Properties > tab Drivers

Select each unwanted entry > Remove > OK to exit menu

Back in Devices and Printers > Right-Click on the printer > Remove Device

Check / Remove – Printer folder/files in C:\ ProgramData

Open File Explorer > Navigate to C:\ProgramData > Open folder Hewlett Packard

Delete any Printer related folders / files

Check / Remove - Printer Software – Lurking in the Device Manager

Control Panel > icon view > Device Manager

Expand category Printers

If any unwanted printer name or “Unknown Device” is listed,

Right-Click on the printer / device > Uninstall

Expand category Imaging Devices

If any unwanted printer name or “Unknown Device” is listed,

Right-Click on the printer / device > Uninstall

Check / Remove  - Printer Software – Lurking in the User Account

Clear HP / files in Temp folder

Windows key + X + R (Run command) > type %temp%

Delete the files in the Temp folder (Ignore files that cannot be removed)

Open File Explorer > Navigate to C:\Users\YourAccount\AppData\Local\HP

Remove / Delete any folder named for the printer you wish to remove

Manual Queue Reset

Details…

Control Panel > icon view > Administrative Tools > Services

Scroll down, find, Right-Click, and Stop Print Spooler Service

Open File Explorer (formally Windows Explorer)

Navigate to the folder and Delete the files from folder C:\Windows\System32\spool\PRINTERS

Back in Services …

Start Print Spooler Service

End Check and Remove Section

After all checks are completed > Restart the computer and log in

=========================================================================

If you have installation, offline, or port issues, assign a TCP/IP port for the printer.

Method – Add printer using TCP/IP

Please try adding the printer using the printer’s IP address

Find the IP Address of the printer on the Printer Control / Display Panel (touch Wireless button)

Control Panel > icon view Devices and Printers

Click in the top ribbon, Add a Printer

Wait till the menu starts…
Select / Click The printer that I want isn’t listed
Select / Click Add a printer using a TCP/IP address or hostname

Select / Click Next
Device Type > Select in Drop-Down Menu:  TCP/IP Device

Hostname or IP Address > Enter the IP Address of the printer

(Skip Port Name)

Select / Click Next

Complete any additional information

Related to...

Method - Create TCP IP port (InkJet Printer)

Find printer's IP /  IPv4 address

Print a Configuration Page

OR

Tap on the wireless icon on Printer Control / Display Panel

Control Panel > icon view > Devices and Printers

 Right-Click on the printer > Left-Click Printer Properties

 Select Tab Ports  > Add Port

 Select Standard TCP/IP Port > New Port and follow the wizard.
 Use / Enter IP address for the printer.

Example - How-to “Create TCP Port” Contributed by greenturtle

Video:  Create & Use TCP IP port
“Note that you can ALWAYS revert back to the original port that the HP software installed by selecting the HP port within the Ports tab (in Printer Properties)”

=========================================================================

Check your Network (router side)

Wireless Center > Section: Common Questions > Topic Connection Issues

Section: Improve Wireless communication by setting a manual (static) IP address

Wireless Center > Section: Common Questions > Topic Printer no longer works on network

Section:  Mesh Networks

Wireless Printing Center – Static IP Address

AND

Wireless Printing Center > Common Questions > Wireless Connection Issues

Example

SSID_Dual_Band_Example_7

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not an HP business group.

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question / Concern Answered, Click "Accept as Solution"