cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
Brucens
New member
3 1 0 0
Message 1 of 4
91
Flag Post

MFPM283FDW very noisy start up and print cycles

HP Recommended
Custom
Microsoft Windows 10 (64-bit)

MFPM283FDW is very noisy during start up . When printing the same very noisy  level is heard. The printer has done this since installation. The printer is month and a half into warranty. No error messages.

3 REPLIES 3
Jay_G24
HP Support Agent
HP Support Agent
10,867 10,837 793 888
Message 2 of 4
Flag Post
HP Recommended

Hi @Brucens,

 

I'd like to help!

 

Try the below suggestions -

 

Let's try a power reset on the printer

 

Reset the product

  • With the printer turned on, disconnect the power cord from the rear of the printer.
  • Unplug the power cord from the wall outlet.
  • Wait at least 60 seconds.
  • Plug the power cord back into the wall outlet.
  • Reconnect the power cord to the printer.
  • Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

Try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware

 

Also, check if there is any broken parts or jams inside the printer Paper Jam Error

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Brucens
Author
New member
3 1 0 0
Message 3 of 4
Flag Post
HP Recommended

Tried this. Have seen the Microsoft solution elsewhere. The printer makes the whining noise each time it is turned on , during printing and  initialising as well .  Thanks for your input

Reply
0 Kudos
Jay_G24
HP Support Agent
HP Support Agent
10,867 10,837 793 888
Message 4 of 4
Flag Post
HP Recommended

We have tried all the troubleshooting steps from our end, I think this issue needs some additional technical assistance that can be better provided through one-on-one interaction or a remote session with our HP Support team.

Please reach out to HP Support in your region for further assistance.

 

Hope this helps!

 

Keep me posted!

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation