Moved houses and can’t get printer to connect to new wifi

[Blank354]

I recently moved houses and can’t seem to connect my printer to the wifi.I’ve tried using HP smart app and it says no printer found.

[Jay_G24]

Hi @Muzammil01,

Welcome to the HP Support Community. 

I'd like to help!

Please try the steps below to connect your printer to the network.-

● Press the Wireless button ((i)) and the Cancel button (X) from the printer control panel at the same time, and then hold them for three seconds.

--->On the printer control panel, press the Wi-Fi Direct button.

---> When Wi-Fi Direct is turned on, the Wi-Fi Direct light is on steady. 

--->To find the Wi-Fi Direct name and password, press the Information button (i) for 3 secs to print a printer information page.

--->On your computer or phone go to wifi and connect it to your printer 

--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP 3700)

Or 3600

--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 

--->If prompted for a password, type 12345678. This is the default password.

--->Now open a browser and type 192.168.223.1

--->you will be able to access the printer's EWS page 

--->on the page, you will find network - click on it 

--->go to wireless and select wireless setup wizard

--->now select the network that you want your printer to connect to and type in the password 

--->the wireless blue light will stop blinking once the printer is connected 

--->then connect your phone back to your network

You may also refer to - No Connection after Router or Wi-Fi Settings Change

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Yes" on the bottom right to say “Thanks” for helping