cancel
Showing results for 
Search instead for 
Did you mean: 
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
  • ×
    Information
    HP Solution Center Adobe Flash player error

    Please check this document to find the workaround solution for Print and Scan - HP Solution Center doesn't open

    Information
    Fix Windows 10 Update Issues

    Resolve Windows 10 or update issues on HP computer or printer– Click Here

  • post a message
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
New member
1 0 0 0
Message 1 of 2
69
Flag Post

New printer will not print - says "the printer is not connected"?

HP Recommended
Envy Pro 6455
macOS 10.15 Catalina

Just unpacked and set up the Envy Pro 6455.  Installed HP Smart on my MacBook Pro and went through all steps and given all clear from HP app.  Tried printing one thing and printer comes up but will not print but says "the printer is not responding"?

Is there some step that is not included in instructions?  Will send back if this can't be easily solved as no printer should be this difficult to use.

1 REPLY 1
HP Support Agent
HP Support Agent
9,088 9,062 612 681
Message 2 of 2
Flag Post
HP Recommended

Hi @kaj8,

 

I'd like to help!

 

To assist better -

  1. How is the printer connected to your device Wi-Fi or USB?
  2. Is there antivirus software installed on your Mac?

Let's try a power reset on the printer

 

Reset the product

 

With the printer turned on, disconnect the power cord from the rear of the printer.

Unplug the power cord from the wall outlet.

Wait at least 60 seconds.

Plug the power cord back into the wall outlet.

Reconnect the power cord to the printer.

Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

 

Try updating mac and printer firmware

 

To update the printer's firmware, refer - HP Printers - Updating or Upgrading Printer Firmware 

 To update Mac, try these steps - How to update the software on your Mac

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation