Printer

[Tee4Two1]

how do i use my existing printer after I cancelled instant ink subscription?

[Irfan_06]

Hi @Tee4Two1,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

I see that you are facing an issue with your printer after cancelling the instant ink service.

When you cancel the service:

• You can continue printing with Instant Ink supplies until the end of your current billing cycle.
• At the end of the billing cycle, you must remove Instant Ink cartridges and purchase Original HP Ink or Toner directly from the retailer of your choice to continue printing. Instant Ink cartridges only work in enrolled printers.
• Your final monthly charge comes at the end of the billing cycle.
• The Paper Add-on service ends with your Instant Ink service.

Please follow the steps below if you have any issues using the printer with store bought ink cartridges.

A) Perform a power drain

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a good day.

Irwin6

HP Support