cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
New member
1 0 0 0
Message 1 of 2
62
Flag Post

Re: Wifi not connected issue

HP Recommended

My DJ2540 has a constant flashing blue light. This has only been an issue since the latest ios 14 update - we have had to reset all devices in the house, but I can't seem to find a way to rectify the problem on the printer.  Have tried the HP scan dr but that said everything was fine, printed a test page, but didn't resolve the flashing blue light. 

Am trying to tweet HPto see if they can help.

1 REPLY 1
HP Support Agent
HP Support Agent
9,244 9,218 626 701
Message 2 of 2
Flag Post
HP Recommended

Hi @Prestige123,

 

I'd like to help!

 

The flashing blue light indicates the printer is not connected to the network.

 

Please try the steps below to connect your printer to the network.

 

--->On the printer control panel, press the Wi-Fi Direct button.
---> When Wi-Fi Direct is turned on, the Wi-Fi Direct light is on steady. 
--->To print the information page, press and hold the Wireless Direct button for more than 3 seconds
--->On your computer or phone go to wifi and connect it to your printer 
--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP Deskjet2540).
--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 
--->If prompted for a password, type 12345678. This is the default password.
--->Now open a browser and type 192.168.223.1
--->you will be able to access the printer's EWS page 
--->on the page, you will find network - click on it 
--->go to wireless and select wireless setup wizard
--->now select the network that you want your printer to connect to and type in the password 
--->thewireless blue light will stop blinking once the printer is connected 
--->then connect your phone back to your network

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Reply
0 Kudos
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation