Ask questions. Help others.
The HP Community is here for you.
Post new question
Note on archived topics.
This topic has been archived. Information and links in this thread may no longer be available or relevant.
If you have a question create a new topic by clicking here, or click on "Post new question" above and select the appropriate board.
Posts: 1
Member Since: ‎03-27-2014
Message 1 of 2 (178 Views)

5610 all in one allignment problem

My officejet 5610 all in one

takes is not alligning the cartridges in second step that is the scanning just goes in dispalyin"alligniing cartridges please wiait"..and it doesnt allign even after an hour

0 Kudos
HP Support Agent
Posts: 17,300
Member Since: ‎09-02-2013
Message 2 of 2 (137 Views)

Re: 5610 all in one allignment problem

Hi Devjoshi,


I would like to help you complete the alignment on your Officejet 5610. I would recommend leaving the printer on and unplugging the power cable for 1 minute. This will accomplish what is called a hard reset. After the minute, plug the printer back in and try to align the cartridges again.


If the issue persists, remove both cartridges, turn of the printer, wait a minute, turn the printer back on, and then reinstall the cartridges.


I hope this helps. If neither of these solutions resolves the issue let me know and I will see what else I can find.


I work on behalf of HP

If you found this post helpful, you can let others know by clicking the Accept as Solution button. You can also show your appreciation, with a kudos, by clicking the thumbs up" button!

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation